You don't have the profile for one of your dives? No problem! Choose "Edit->Edit dive-profile" from the menu to manually enter the profile with the mouse.
After a short surface interval your dive computer started a new dive; however you want those two dives to count as one: Choose "Edit->Merge Dives" from the menu to merge the two dives into one (possible with a surface interval of less than 15 minutes).
You did two dives, but your surface interval was so short that your dive computer counted them as one: Choose "Edit->Split dive" to seperate the dive into two dives (there must have been a short surface interval).
Use "Edit->Copy" and "Edit->Paste" to copy a dive from one log to another. Use "Edit->Clipboard several dives->Copy" and "Edit->Clipboard several dives->Paste" to copy a number of dives from one log to another.
Not satisfied with the selection of statistics? Choose "File->Create select file" from the menu to create your own filter.
Your log shows dives in the recompression chamber but you never made any? "Recompression chamber" is the default setting for all dives in WLog. Edit the dive data to mark them as fresh- or seawater dives.
Have you ever experienced a "NTD" warning in one of your dive profiles? "NTD" means "No Tank Data"; it happens when your air-integrated computer looses its connection to the transmitter at the first stage of your regulator.
You may recalculate your dive profile using the "DECO 92" deco table: In the profile view click the "Deco 92" button to display a second (yellow) line which shows the calculated profile.
If you would like to compare two dive profiles display the profile of the first dive and click the "Copy" button. Then display the profile of the second dive and click the "Paste" button. The first dive will then be displayed as a yellow line (this also works between two different log files).
The headers of some printouts will display the "Owner" and "Club" information you specify in "Extra->Certifications".
Have you ever forgotten to have your tank inspected or your regulator serviced? Store all your equipement data in "Extra->Equipement" and specify the date for the next maintenance. Check the "Warn next maintenance" checkbox and the "Auto Check" checkbox on the main equipement page and a note will be displayed when the program starts whenever a maintenance is due.
Your dive-computer isn't recognized (black field on the main page)? Send me one of your logfiles and tell me the type of your computer and I'll include it immendiately.
Older dives may be inserted by choosing "Edit->New dive". The dive will be inserted into the list according to the date you specified.
During a dive you have been in very shallow water for some time, so the divetime your computer displays is a few minutes short: Check the "Free edit" check box to be able to edit all fields.